Found transmission mount bolts from crossmember to mount were all loose. All 4 bolts were only halfway installed. Tightened bolts and had big improvement, but still have slight vibration. Can feel some binding in rear shaft u-joints. That would be next step. Front shaft appears new. Outer tie rod ends and lower ball joints are loose. Right rear sway bar link is broken. Being a lifted vehicle, it may have incorrect driveline angles and will likely never drive like it did at stock ride height.
SHOCK ABSORBER – Remove & Replace – Both – [DOES NOT include alignment.]
Rear calipers wearing pads unevenly. Will need to replace guide pins. Rear pads have about 25% life left. Rotors will need replacement with pads. Front pads have 60% life.
Dale M. gave our service a 5 star review on 6/13/2021
2004 Jeep Grand Cherokee CRM Mitchell1
2021-06-14T22:00:30+00:00
AXLE SHAFT ASSEMBLY – Remove & Install or Remove & Replace – Mfr Body CD MK,AWD Right – [DOES NOT include wheel alignment. DOES NOT include drain and refill Transmission Fluid or Fluid Level check.] – [NOTE: For Independent Suspension Type Axles, Axle Sha
Oil Change
Gaylene S. gave our service a 5 star review on 3/11/2021